Netgear XSM4324FS CLI Manual Software Version 12.x - Page 755

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition LSA High Water Mark The maximum size of the link state database since the system started. AS Scope LSA The number of LSAs currently in the global flood queue waiting to be flooded through the OSPF Flood List Length domain. LSAs with AS flooding scope, such as type 5 external LSAs and type 11 Opaque LSAs. Retransmit List Entries The total number of LSAs waiting to be acknowledged by all neighbors. An LSA may be pending acknowledgment from more than one neighbor. Maximum Number The maximum number of LSAs that can be waiting for acknowledgment at any given time. of Retransmit Entries Retransmit Entries The maximum number of LSAs on all neighbors' retransmit lists at any given time. High Water Mark NSF Support Indicates whether nonstop forwarding (NSF) is enabled for the OSPF protocol for planned restarts, unplanned restarts or both (Always). NSF Restart Interval The user-configurable grace period during which a neighboring router will be in the helper state after receiving notice that the management unit is performing a graceful restart. NSF Restart Status The current graceful restart status of the router. • Not Restarting • Planned Restart • Unplanned Restart NSF Restart Age Number of seconds until the graceful restart grace period expires. NSF Restart Exit Reason Indicates why the router last exited the last restart: • None - Graceful restart has not been attempted. • In Progress - Restart is in progress. • Completed - The previous graceful restart completed successfully. • Timed Out - The previous graceful restart timed out. • Topology Changed - The previous graceful restart terminated prematurely because of a topology change. NSF Help Support Indicates whether helpful neighbor functionality has been enabled for OSPF for planned restarts, unplanned restarts, or both (Always). NSF help Strict LSA checking Indicates whether strict LSA checking has been enabled. If enabled, then an OSPF helpful neighbor will exit helper mode whenever a topology change occurs. If disabled, an OSPF neighbor will continue as a helpful neighbor in spite of topology changes. Prefix-suppression Displays whether prefix-suppression is enabled or disabled. (alpha3) #show ip ospf Router ID 3.3.3.3 OSPF Admin Mode Enable RFC 1583 Compatibility Enable External LSDB Limit No Limit Exit Overflow Interval 0 Spf Delay Time 5 Routing Commands 755 CLI Command Reference Manual