Netgear XSM4324FS CLI Manual Software Version 12.x - Page 557
mvr type, mvr vlan group, Use this command to set the MVR port type to none.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 557 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches received from other interested hosts that are also connected to that port, for example, using hub. • In immediate leave mode, when a leave is received, the switch is immediately reconfigured not to forward a specific multicast stream to the port where a message is received. This mode is used only for ports where only one client might be connected. Default Format Mode Disabled mvr immediate Interface Config no mvr immediate This command sets the MVR multicast VLAN to the default value. Format Mode no mvr immediate Interface Config mvr type This command sets the MVR port type. When a port is set as source, it is the port to which the multicast traffic flows using the multicast VLAN. When a port is set to receiver, it is the port where a listening host is connected to the switch. Default Format Mode none mvr type {receiver | source} Interface Config no mvr type Use this command to set the MVR port type to none. Format Mode no mvr type Interface Config mvr vlan group Use this command to include the port in the specific MVR group. mVLAN is the multicast VLAN, and A.B.C.D is the IP multicast group. Format Mode mvr vlan mVLAN group A.B.C.D Interface Config Switching Commands 557 CLI Command Reference Manual