Netgear XSM4324FS CLI Manual Software Version 12.x - Page 489

M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Definition Mcast Mode Shows whether the multicast storm control mode is enabled or disabled. Mcast Level The multicast storm control level. Mcast Action The multicast storm recovery acton. Ucast Mode Shows whether the Unknown Unicast or DLF (Destination Lookup Failure) storm control mode is enabled or disabled. Ucast Level The Unknown Unicast or DLF (Destination Lookup Failure) storm control level. Ucast Action The unicast storm recovery acton. Command example: (NETGEAR Switch) #show storm-control Broadcast Storm Control Mode Enable Broadcast Storm Control Level 5 percent Broadcast Storm Control Action None Multicast Storm Control Mode Disable Multicast Storm Control Level 5 percent Multicast Storm Control Action None Unicast Storm Control Mode Disable Unicast Storm Control Level 5 percent Unicast Storm Control Action None Command example: (NETGEAR Switch) #show storm-control 1/0/1 Bcast Intf ----1/0/1 Bcast Mode -----Enable Bcast Level ----5% Mcast Action -----None Mcast Mode ------Disable Mcast Level ----5% Ucast Action -----None Ucast Mode ------Disable Ucast Level ----5% Flow Action -----None Mode ------Disable Command example: (NETGEAR Switch) #show storm-control all Bcast Bcast Bcast Mcast Mcast Mcast Intf Mode Level Action Mode Level 1/0/1 Enable 5% None Disable 5% 1/0/2 Enable 5% None Disable 5% 1/0/3 Enable 5% None Disable 5% 1/0/4 Enable 5% None Disable 5% 1/0/5 Enable 5% None Disable 5% Ucast Action -----None None None None None Ucast Mode ------Disable Disable Disable Disable Disable Ucast Level ----5% 5% 5% 5% 5% Flow Action -----None None None None None Mode ------Disable Disable Disable Disable Disable Switching Commands 489 CLI Command Reference Manual