Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1016

M4300 Intelligent Edge Series Fully Managed Stackable Switches show ip mroute group This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast route table containing the given groupipaddr. Format Modes show ip mroute group groupipaddr {detail | summary} Privileged EXEC User EXEC Term Definition Source IP Addr The IP address of the multicast data source. Group IP Addr The IP address of the destination of the multicast packet. Protocol The multicast routing protocol by which this entry was created. Incoming Interface The interface on which the packet for this group arrives. Outgoing Interface The list of outgoing interfaces on which this packet is forwarded. List show ip mroute source This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast route table containing the given source IP address (sourceipaddr) or source IP address and group IP address (groupipaddr) pair. Format Modes show ip mroute source sourceipaddr {summary | groupipaddr} Privileged EXEC User EXEC If you use the groupipaddr parameter, the command displays the following column headings in the output table. Term Source IP Addr Group IP Addr Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The time of expiry of this entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. IP Multicast Commands 1016 CLI Command Reference Manual