Netgear XSM4324FS CLI Manual Software Version 12.x - Page 230
show logging hosts, show logging traplogs, output filter options.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show logging hosts This command displays all configured logging hosts. Use the "|" character to display the output filter options. Format Mode show logging hosts Privileged EXEC Term Host Index IP Address / Hostname Severity Level Port Status Mode Auth Cert# Definition Used for deleting hosts. IP address or hostname of the logging host. The minimum severity to log to the specified address. The possible values are emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). The server port number, which is the port on the local host from which syslog messages are sent. The status of SNMP (Active, Not in Service, or Not Ready). The type of security: UDP or TLS. The type of authentication mode: anonymous or x509name. The certificate number to be used for authentication. The valid range is from 0 to 8. Index 0 is used for the default file. Command example: (NETGEAR Switch) #show logging hosts Index ----1 1 IP Address/Hostname 10.130.64.88 2000::150 Severity Port Status Mode Auth Cert# critical 514 Active udp critical 514 Active udp show logging traplogs This command displays SNMP trap events and statistics. Format Mode show logging traplogs Privileged EXEC Term Definition Number of Traps Since Last Reset The number of traps since the last boot. Trap Log Capacity The number of traps the system can retain. Number of Traps Since Log Last Viewed The number of new traps since the command was last executed. Utility Commands 230 CLI Command Reference Manual