Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1037
show ip pim bsr-router, If no neighbors were learned on any of the interfaces
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1037 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR) #show ip pim neighbor Neighbor Addr Interface 192.168.10.2 1/0/1 192.168.20.2 1/0/2 Uptime Expiry Time DR (hh:mm:ss) (hh:mm:ss) Priority 00:02:55 00:01:15 1 00:03:50 00:02:10 1 Command example: If no neighbors were learned on any of the interfaces, the following message is displayed: No neighbors exist on the router. show ip pim bsr-router This command displays the bootstrap router (BSR) information. Format Mode show ip pim bsr-router {candidate | elected} Privileged EXEC User EXEC Parameter Definition BSR Address IP address of the BSR. BSR Priority Priority as configured in the ip pim bsr-candidate command. BSR Hash Mask Length Length of a mask (maximum 32 bits) that is to be ANDed with the group address before the hash function is called. This value is configured in the ip pim bsr-candidate command. C-BSR Advertisement Indicates the configured C-BSR Advertisement interval with which the router, acting as a Interval C-BSR, will periodically send the C-BSR advertisement messages. Next Bootstrap Message Time (in hours, minutes, and seconds) in which the next bootstrap message is due from this BSR. Command example: (NETGEAR) #show ip pim bsr-router elected BSR Address 192.168.10.1 BSR Priority 0 BSR Hash Mask Length 30 Next Bootstrap message (hh:mm:ss 00:00:24 IP Multicast Commands 1037 CLI Command Reference Manual