Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1100
show power rps, This command applies to model M4300-52G-POE+ only.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1100 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Output Voltage The voltage supplied to the powered device (in volts). (volts) Status The Status field reports the state of power supplied to the port. The possible values are: • Disabled-The PoE function is disabled on this port. • Searching-The port is detecting the PoE device. • Delivering Power-The port is providing power to the PoE device. • Fault-The POE device is not IEEE compliant; no power is provided. • Test-The port is in testing state. • Other Fault-The port has experienced problems other than compliance issues. When a port begins to deliver power, there is a trap indicating so. When a port stops delivering power, there is a trap indicating so. Command example: (NETGEAR Switch) #show poe port info all High Intf Power 0/1 Yes Max Power Class (W 32.0 Unknown Power (W) ------ Output Current (mA) ------- 00.000 0 Output Voltage (volt) ------- 00.00 Status Fault Status Searching No Error Command example: (NETGEAR Switch) #show poe port info 0/33 Intf High Power 0/33 No Error Max Power (W) ----- 18.0 Output Output Class Power Current Voltage (W) (mA) (volt) 2 04.400 84 53.3 Status Fault Status Delivering Power No show power rps Note: This command applies to model M4300-52G-POE+ only. Power over Ethernet Commands 1100 CLI Command Reference Manual