Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1022

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Interface Mode Indicates whether DVMRP is enabled or disabled on the specified interface. Metric The metric of this interface. This is a configured value. Local Address The IP address of the interface. The following field is displayed only when DVMRP is operational on the interface. Term Generation ID Definition The Generation ID value for the interface. This is used by the neighboring routers to detect that the DVMRP table should be resent. The following fields are displayed only if DVMRP is enabled on this interface. Term Received Bad Packets Received Bad Routes Sent Routes Definition The number of invalid packets received. The number of invalid routes received. The number of routes that have been sent on this interface. show ip dvmrp neighbor This command displays the neighbor information for DVMRP. Format Modes show ip dvmrp neighbor Privileged EXEC User EXEC Term IfIndex Nbr IP Addr State Up Time Expiry Time Generation ID Major Version Minor Version Capabilities Definition The value of the interface used to reach the neighbor. The IP address of the DVMRP neighbor for which this entry contains information. The state of the neighboring router. The possible value for this field are ACTIVE or DOWN. The time since this neighboring router was learned. The time remaining for the neighbor to age out. This field is not applicable if the State is DOWN. The Generation ID value for the neighbor. The major version of DVMRP protocol of neighbor. The minor version of DVMRP protocol of neighbor. The capabilities of neighbor. IP Multicast Commands 1022 CLI Command Reference Manual