Netgear XSM4324FS CLI Manual Software Version 12.x - Page 284
debug aaa accounting, debug aaa authorization
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Capturing packets is stopped automatically when 128 packets are captured and have not yet been displayed during a capture session. Captured packets are not retained after a reload cycle. Format Mode show capture packets Privileged EXEC debug aaa accounting This command is useful to debug accounting configuration and functionality in User Manager Note: To display the debug trace, enable the debug console command. Format Mode debug aaa accounting Privileged EXEC no debug aaa accounting Use this command to turn off debugging of User Manager accounting functionality. Format Mode no debug aaa accounting Privileged EXEC debug aaa authorization Use this command to enable the tracing for AAA in User Manager. This is useful to debug authorization configuration and functionality in the User Manager. Each of the parameters are used to configure authorization debug flags. Note: To display the debug trace, enable the debug console command. Format Mode debug aaa authorization [commands | exec] Privileged EXEC no debug aaa authorization Use this command to turn off debugging of the User Manager authorization functionality. Format Mode no debug aaa authorization Privileged EXEC Utility Commands 284 CLI Command Reference Manual