Netgear XSM4324FS CLI Manual Software Version 12.x - Page 518

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Link-State Trap Flag Type Mbr Ports Active Ports Definition Shows whether the link is up or down. Shows whether trap flags are enabled or disabled. Shows whether the port-channel is statically or dynamically maintained. The members of this port-channel. The ports that are actively participating in the port-channel. show port-channel This command displays an overview of all port-channels (LAGs) on the switch. Format Mode show port-channel Privileged EXEC Term Logical Interface Port-Channel Name Link State Admin Mode Type Load Balance Option Local Preference Mode Mbr Ports Device Timeout Port Speed Active Ports Definition The valid unit/slot/port number. The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric characters. Indicates whether the Link is up or down. May be enabled or disabled. The factory default is enabled. The status designating whether a particular port-channel (LAG) is statically or dynamically maintained. • Static. The port-channel is statically maintained. • Dynamic. The port-channel is dynamically maintained. The load balance option associated with this LAG. See port-channel load-balance on page 514. Indicates whether the local preference mode is enabled or disabled. A listing of the ports that are members of this port-channel (LAG), in unit/slot/port notation. There can be a maximum of eight ports assigned to a given port-channel (LAG). For each port, lists the timeout (long or short) for Device Type (actor or partner). Speed of the port-channel port. This field lists ports that are actively participating in the port-channel (LAG). Switching Commands 518 CLI Command Reference Manual