Netgear XSM4324FS CLI Manual Software Version 12.x - Page 994
auto-voip oui-based priority, auto-voip protocol-based, no auto-voip oui
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 994 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default A list of known OUIs is present. Format auto-voip oui oui-prefix desc string Mode Global Config Command example: The following example adds an OUI to the table: (NETGEAR Switch) (Config)#auto-voip oui 00:03:6B desc "Cisco VoIPPhone" no auto-voip oui Use the no auto-voip oui command to remove a configured OUI prefix from the table. Format Mode no auto-voip oui oui-prefix Global Config auto-voip oui-based priority Use this command to configure the global OUI based auto VoIP priority. If the phone OUI matches one of the configured OUIs, the priority of traffic from the phone is changed to the OUI priority configured through this command. The priority-value is the 802.1p priority used for traffic that matches a value in the known OUI list. If the interface detects an OUI match, the switch assigns the traffic in that session to the traffic class mapped to this priority value. Traffic classes with a higher value are generally used for time-sensitive traffic. Default Format Mode Highest available priority. auto-voip oui-based priority priority-value Global Config no auto-voip oui-based priority Use the no auto-voip oui-based priority command to reset the global OUI based auto VoIP priority to its default. Format Mode no auto-voip oui-based priority Global Config auto-voip protocol-based Use this command to configure the global protocol-based auto VoIP remarking priority or traffic-class. If remark priority is configured, the voice data of the session is remarked with the priority configured through this command. The remark-priority is the 802.1p priority Quality of Service Commands 994 CLI Command Reference Manual