Netgear XSM4324FS CLI Manual Software Version 12.x - Page 420

M4300 Intelligent Edge Series Fully Managed Stackable Switches vlan participation all This command configures the degree of participation for all interfaces in a VLAN. The number is a valid VLAN identification number in the range 1-4093. Format Mode vlan participation all {exclude | include | auto} number Global Config You can use the following participation options: Participation Options include exclude auto Definition The interface is always a member of this VLAN. This is equivalent to registration fixed. The interface is never a member of this VLAN. This is equivalent to registration forbidden. The interface is dynamically registered in this VLAN by GVRP. The interface will not participate in this VLAN unless a join request is received on this interface. This is equivalent to registration normal. vlan port acceptframe all This command sets the frame acceptance mode for all interfaces. For the all mode, untagged frames or priority frames that enter on an interface are accepted and assigned the VLAN ID of the interface. With any of the three modes, VLAN-tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN specification. Default Format Mode all vlan port acceptframe all {vlanonly | admituntaggedonly | all} Global Config The modes are defined as follows: Mode vlanonly admituntaggedonly all Definition VLAN-only mode. Untagged frames or priority frames received on this interface are discarded. Admit untagged-only mode. VLAN-tagged and priority tagged frames received on this interface are discarded. Admit all mode. Untagged frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. Switching Commands 420 CLI Command Reference Manual