Netgear XSM4324FS CLI Manual Software Version 12.x - Page 615

M4300 Intelligent Edge Series Fully Managed Stackable Switches Inventory Hardware Rev: xxx xxx xxx Firmware Rev: xxx xxx xxx Software Rev: xxx xxx xxx Serial Num: xxx xxx xxx Mfg Name: xxx xxx xxx Model Name: xxx xxx xxx Asset ID: xxx xxx xxx Location Subtype: elin Info: xxx xxx xxx Extended POE Device Type: pseDevice Extended POE PSE Available: 0.3 Watts Source: primary Priority: critical Extended POE PD Required: 0.2 Watts Source: local Priority: low show lldp med remote-device Use this command to display the summary information about remote devices that transmit current LLDP MED data to the system. You can show information about LLDP MED remote data received on all valid LLDP interfaces or on a specific physical interface. Format Mode show lldp med remote-device {unit/slot/port | all} Privileged EXEC Term Local Interface Remote ID Device Class Definition The interface that received the LLDPDU from the remote device. An internal identifier to the switch to mark each remote device to the system. Device classification of the remote device. Command example: (NETGEAR Switch) #show lldp med remote-device all Switching Commands 615 CLI Command Reference Manual