Netgear XSM4324FS CLI Manual Software Version 12.x - Page 931

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following information is repeated for each user priority. Term User Priority Traffic Class Definition The 802.1p user priority value. The traffic class internal queue identifier to which the user priority value is mapped. show classofservice ip-dscp-mapping This command displays the current IP DSCP mapping to internal traffic classes for the global configuration settings. Format Mode show classofservice ip-dscp-mapping Privileged EXEC The following information is repeated for each user priority. Term IP DSCP Traffic Class Definition The IP DSCP value. The traffic class internal queue identifier to which the IP DSCP value is mapped. show classofservice trust This command displays the current trust mode setting for a specific interface. The unit/slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If you specify an interface, the command displays the port trust mode of the interface. If you do not specify an interface, the command displays the most recent global configuration settings. Format Mode show classofservice trust [unit/slot/port] Privileged EXEC Term Definition Class of Service Trust Mode The the trust mode, which is either Dot1P, IP DSCP, or Untrusted. Non-IP Traffic Class (IP DSCP mode only) The traffic class used for non-IP traffic. Untrusted Traffic Class (Untrusted mode only) The traffic class used for all untrusted traffic. show interfaces cos-queue This command displays the class-of-service queue configuration for the specified interface. The unit/slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the class-of-service queue Quality of Service Commands 931 CLI Command Reference Manual