Netgear XSM4324FS CLI Manual Software Version 12.x - Page 849

M4300 Intelligent Edge Series Fully Managed Stackable Switches P - Net Prototype P 3001::/64 [0/1] via 2001::4, 00h:00m:04s, 0/1 P 3001:0:0:1::/64 [0/1] via 2001::4, 00h:00m:04s, 0/1 show ipv6 route preferences Use this command to show the preference value associated with the type of route. Lower numbers have a greater preference. A route with a preference of 255 cannot be used to forward traffic. Format Mode show ipv6 route preferences Privileged EXEC Term Local Static OSPF Intra OSPF Inter OSPF External BGP External BGP Internal BGP Local Definition Preference of directly-connected routes. Preference of static routes. Preference of routes within the OSPF area. Preference of routes to other OSPF routes that are outside of the area. Preference of OSPF external routes. Preference of BGP external routes. Preference of routes to other BGP routes that are outside of the area. Preference of routes within the BGP area. show ipv6 route summary This command displays a summary of the state of the routing table. When the optional all keyword is given, some statistics, such as the number of routes from each source, include counts for alternate routes. An alternate route is a route that is not the most preferred route to its destination and therefore is not installed in the forwarding table. To include only the number of best routes, do not use the optional all keyword. Format Modes show ipv6 route summary [all] Privileged EXEC User EXEC Term Connected Routes Static Routes Definition Total number of connected routes in the routing table. Total number of static routes in the routing table. IPv6 Commands 849 CLI Command Reference Manual