Netgear XSM4324FS CLI Manual Software Version 12.x - Page 301
This command enables tracing of ICMP echo requests and responses. The command traces
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches LS_REQ packet field definitions. Field Length Definition Length of packet LS_UPD packet field definitions. Field Length Definition Length of packet LS_ACK packet field definitions. Field Length Definition Length of packet no debug ospf packet This command disables tracing of OSPF packets. Format Mode no debug ospf packet Privileged EXEC debug ping packet This command enables tracing of ICMP echo requests and responses. The command traces pings on the network port/ service port for switching packages. For routing packages, pings are traced on the routing ports as well. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug ping packet Privileged EXEC The following sample shows the output of the trace message. JAN 01 00:21:22 192.168.17.29-1 SIM[181040176]: sim_debug.c(128) 20 % Pkt TX - Intf: 1/0/1(1), SRC_IP:10.50.50.2, DEST_IP:10.50.50.1, Type:ECHO_REQUEST JAN 01 00:21:22 192.168.17.29-1 SIM[182813968]: sim_debug.c(82) 21 % Pkt RX - Intf: 1/0/1(1), S RC_IP:10.50.50.1, DEST_IP:10.50.50.2, Type:ECHO_REPLY Utility Commands 301 CLI Command Reference Manual