Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1127
Table 66., DVMRP Log Messages, Table 65., PIM-DM Log Messages continued
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1127 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 65. PIM-DM Log Messages (continued) Component PIMDM PIMDM Message Cause PIMDMv6 Socket Memb'ship Disable Failed for rtrIfNum - xxx. PIMDMv6 Socket Creation/options Disable with Kernel IP Stack Failed. As a result of this, the PIMv6 Control packets are still received on the interface at the application though no protocol is enabled. PIMDM MRT Table Max Limit - xxx Reached; Cannot accommodate any further routes. PIMDM Multicast Route table (S,G) has reached maximum capacity and cannot accommodate new registrations anymore. Table 66. DVMRP Log Messages Component DVMRP DVMRP DVMRP DVMRP DVMRP DVMRP DVMRP DVMRP Message Cause DVMRP Heap memory initialization is Failed for This message appears when trying to enable the specified address family. DVMRP Protocol DVMRP Heap memory de-initialization is Failed This message appears when trying to disable for the specified address family. DVMRP Protocol. As a result of this, the subsequent attempts to enable/disable DVMRP will also fail. DVMRP protocol initialization sequence Failed. This could be due to the non-availability of some resources. This message appears when trying to enable DVMRP Protocol. DVMRP All Routers Address - xxx Delete from the DTL Mcast List Failed for intf - xxx. DMVRP All Routers Address deletion from the local multicast list Failed. As a result of this, DVMRP Multicast packets are still received at the application though DVMRP is disabled. Mcast Forwarding Mode Disable Failed for intf - The Multicast Forwarding mode Disable Failed for xxx. this routing interface. DVMRP All Routers Address - xxx Add to the DTL Mcast List Failed for intf - xxx. DMVRP All Routers Address addition to the local multicast list Failed. As a result of this, DVMRP Multicast packets with this address will not be received at the application. Mcast Forwarding Mode Enable Failed for intf - xxx. The Multicast Forwarding mode Enable Failed for this routing interface. As a result of this, the ability to forward Multicast packets does not function on this interface. DVMRP Probe Control message Send Failed on rtrIfNum - xxx. DVMRP Probe control message send failed. This could mostly be because of a Failure return status of the socket call sendto(). As a result of this, the DVMRP neighbor could be lost in the neighboring DVMRP routers. Switch Software Log Messages 1127 CLI Command Reference Manual