Netgear XSM4324FS CLI Manual Software Version 12.x - Page 572
When you specify a value for, the following information displays., vlan-id
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 572 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Exclude Mrouter Interface Mode Indicates whether the Exclude Mrouter Interface Mode is enabled or not. IGMP-PLUS Indicates whether IGMP Plus is globally enabled or not. When you specify a value for vlan-id, the following information displays. Term Definition VLAN ID The VLAN ID. IGMP Snooping Admin Mode Indicates whether IGMP Snooping is active on the VLAN. Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the VLAN. Group Membership The amount of time in seconds that a switch will wait for a report from a particular group on a Interval (secs) particular interface, which is participating in the VLAN, before deleting the interface from the entry.This value may be configured. Maximum Response Time (secs) The amount of time the switch waits after it sends a query on an interface, participating in the VLAN, because it did not receive a report for a particular group on that interface. This value may be configured. Multicast Router The amount of time to wait before removing an interface that is participating in the VLAN from the list Expiry Time (secs) of interfaces with multicast routers attached. The interface is removed if a query is not received. This value may be configured. Report Indicates whether IGMP reports (set by the command set igmp report-suppression on page 568) in Suppression Mode enabled or not. Report Flood Mode Indicates whether the IGMP Report Flood Mode is enabled or not. Exclude Mrouter Interface Mode Indicates whether the Exclude Mrouter Interface Mode is enabled or not. IGMP-PLUS Indicates whether IGMP Plus is enabled for the VLAN or not. Command example: (NETGEAR switch) #show igmpsnooping 1 VLAN ID 1 IGMP Snooping Admin Mode Enabled Fast Leave Mode Enabled Group Membership Interval (secs 600 Max Response Time (secs 120 Multicast Router Expiry Time (secs 300 Report Suppression Mode Disabled Report Flood Mode Enabled Exclude Mrouter Interface Mode Enabled IGMP-Plus Enabled Switching Commands 572 CLI Command Reference Manual