Netgear XSM4324FS CLI Manual Software Version 12.x - Page 928
cos-queue strict, random-detect, random-detect queue-parms
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 928 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches cos-queue strict This command activates the strict priority scheduler mode for each specified queue for an interface queue on an interface, a range of interfaces, or all interfaces. Format Modes cos-queue strict queue-id-1 [queue-id-2 ... queue-id-n] Global Config Interface Config no cos-queue strict This command restores the default weighted scheduler mode for each specified queue. Format Modes no cos-queue strict queue-id-1 [queue-id-2 ... queue-id-n] Global Config Interface Config random-detect This command is used to enable WRED for the interface as a whole, and is available only when per-queue WRED activation control is not supported by the device. Specific WRED parameters are configured using the random-detect queue-parms and the random-detect exponential-weighting-constant commands. Format Modes random-detect Global Config Interface Config When specified in Interface Config mode, this command affects a single interface only, whereas in Global Config mode, it applies to all interfaces. The Interface Config mode command is available only on platforms that support independent per-port class of service queue configuration. no random-detect Use this command to disable WRED, thereby restoring the default tail drop operation for all queues on the interface. Format Modes no random-detect Global Config Interface Config Quality of Service Commands 928 CLI Command Reference Manual