Netgear XSM4324FS CLI Manual Software Version 12.x - Page 577
set igmp querier query-interval, set igmp querier timer expiry, address
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 577 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no set igmp querier Use this command to disable IGMP Snooping Querier on the system. Use the optional address parameter to reset the querier address to 0.0.0.0. Format Mode no set igmp querier [vlan-id] [address] Global Config VLAN Mode set igmp querier query-interval Use this command to set the IGMP querier query interval time. It is the period in seconds, from 1-1800 seconds, that the switch waits before sending another general query. Default Format Mode 60 seconds set igmp querier query-interval seconds Global Config no set igmp querier query-interval Use this command to set the IGMP querier query interval time to its default value. Format Mode no set igmp querier query-interval Global Config set igmp querier timer expiry Use this command to set the IGMP querier timer expiration period in seconds, from 60-300 seconds. This is the period that the switch remains in non-querier mode after it has discovered a multicast querier in the network. Default Format Mode 60 seconds set igmp querier timer expiry seconds Global Config no set igmp querier timer expiry Use this command to set the IGMP querier timer expiration period to its default value. Format Mode no set igmp querier timer expiry Global Config Switching Commands 577 CLI Command Reference Manual