Netgear XSM4324FS CLI Manual Software Version 12.x - Page 141
server-key, no ignore session-key, no port
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ignore session-key Use this command to configure the switch not to ignore the session key. That is, this command resets the ignore session key property on the switch. Format Mode no ignore session-key Dynamic Authorization port Use this command to specify the UDP port on which the switch can detect RADIUS requests from the configured dynamic authorization clients. The supported range for the port number is 1025-65535. Default Format Mode 3799 port port-number Dynamic Authorization no port Use this command to reset the configured UDP port on which the switch can detect RADIUS requests from dynamic authorization clients to port number 3799, which is the default port. Default Format Mode 3799 no port Dynamic Authorization server-key Use this command to configure a global shared secret that is used for all dynamic authorization clients on which no individual shared secret key is configured. Format Mode server-key [0 | 7] key-string Dynamic Authorization Parameter 0 7 key-string Description The value that you enter for the key-string parameter specifies an unencrypted key. The value that you enter for the key-string parameter specifies an encrypted key. The shared secret string. For unencrypted key, the maximum length is 128 characters. Management Commands 141 CLI Command Reference Manual