Netgear XSM4324FS CLI Manual Software Version 12.x - Page 41

M4300 Intelligent Edge Series Fully Managed Stackable Switches show stack-port counters Use this command to display summary data counter information for all interfaces. Use the following optional keywords to specify the command output: • number. The output displays for a specific unit in the stack. The value for number can be from 1 to 8. • all. The output displays for all units in the stack. Format Mode show stack-port counters [number | all] Privileged EXEC Term Definition Unit Interface Tx Data Rate Tx Error Rate Tx Total Error The unit number. The slot and port numbers. The trashing data rate in megabits per second on the stacking port. The platform-specific number of transmit errors per second. The platform-specific number of total transmit errors since power-up. Rx Data Rate Rx Error Rate The received data rate in megabits per second on the stacking port. The platform-specific number of received errors per second. Rx Total Errors Link Flaps The platform-specific number of total received errors since power-up. The number of up and down events for the link since the system bootup. This example shows the stack ports and associated statistics of unit 2. (NETGEAR Switch) #show stack-port counters 2 ------------TX RX Data Error Data Error Rate Rate Total Rate Rate Total Link Unit Interface (Mb/s) (Errors/s) Errors (Mb/s) (Errors/s) Errors Flaps 2 0/53 0 0 0 0 0 0 0 2 0/54 0 0 0 0 0 0 0 2 0/55 0 0 0 0 0 0 0 2 0/56 0 0 0 0 0 0 0 Stacking Commands 41 CLI Command Reference Manual