Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1048
show ip igmp interface membership
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1048 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Format Modes show ip igmp interface {unit/slot/port | vlan vlan-id} Privileged EXEC User EXEC Term Definition Interface unit/slot/port IGMP Admin Mode The administrative status of IGMP. Interface Mode Indicates whether IGMP is enabled or disabled on the interface. IGMP Version The version of IGMP running on the interface. This value can be configured to create a router capable of running either IGMP version 1 or 2. Query Interval The frequency at which IGMP Host-Query packets are transmitted on this interface. Query Max Response Time The maximum query response time advertised in IGMPv2 queries on this interface. Robustness The tuning for the expected packet loss on a subnet. If a subnet is expected to be have a lot of loss, the Robustness variable may be increased for that interface. Startup Query Interval The interval between General Queries sent by a Querier on startup. Startup Query Count The number of Queries sent out on startup, separated by the Startup Query Interval. Last Member Query Interval The Maximum Response Time inserted into Group-Specific Queries sent in response to Leave Group messages. Last Member Query Count The number of Group-Specific Queries sent before the router assumes that there are no local members. show ip igmp interface membership This command displays the list of interfaces that registered in the multicast group. The multiipaddr argument specifies the IP address of the multicast group. Format Mode show ip igmp interface membership multiipaddr [detail] Privileged EXEC Term Interface Interface IP State Definition Valid unit, slot and port number separated by forward slashes. The IP address of the interface participating in the multicast group. The interface that has IGMP in Querier mode or Non-Querier mode. IP Multicast Commands 1048 CLI Command Reference Manual