Netgear XSM4324FS CLI Manual Software Version 12.x - Page 128

M4300 Intelligent Edge Series Fully Managed Stackable Switches snmp-server community ipmask This command sets a client IP mask for an SNMP community. The SNMP community sends SNMP packets from an address with this client IP mask. The address along with the client IP mask value denotes a range of IP addresses from which SNMP clients can use the community to access the device. A value of 255.255.255.255 allows access from only one computer and specifies that computer's IP address as the client IP address. A value of 0.0.0.0 allows access from any IP address. The name is the applicable community name. Default Format Mode 0.0.0.0 snmp-server community ipmask ipmask name Global Config no snmp-server community ipmask This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. Format Mode no snmp-server community ipmask name Global Config snmp-server community mode This command activates an SNMP community. If a community is enabled, an SNMP manager that is associated with this community manages the switch according to its access right. If the community is disabled, no SNMP requests using this community are accepted. In this case, the SNMP manager that is associated with this community cannot manage the switch until the status is changed back to enabled. Default Format Mode • private and public communities - enabled • other four - disabled snmp-server community mode name Global Config no snmp-server community mode This command deactivates an SNMP community. If the community is disabled, no SNMP requests using this community are accepted. In this case, the SNMP manager that is associated with this community cannot manage the switch until the status is changed back to enabled. Format Mode no snmp-server community mode name Global Config Management Commands 128 CLI Command Reference Manual