Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1046
show ip igmp, show ip igmp groups, no ip igmp startup-query-interval
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1046 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default Format Mode 31 ip igmp startup-query-interval seconds Interface Config no ip igmp startup-query-interval This command resets the interval between General Queries sent on startup on the interface to the default value. Format Mode no ip igmp startup-query-interval Interface Config show ip igmp This command displays the system-wide IGMP information. Format Modes show ip igmp Privileged EXEC User EXEC Term Definition IGMP Admin Mode The administrative status of IGMP. This is a configured value. Interface unit/slot/port Interface Mode Indicates whether IGMP is enabled or disabled on the interface. This is a configured value. Protocol State The current state of IGMP on this interface. Possible values are Operational or Non-Operational. show ip igmp groups This command displays the registered multicast groups on the interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. If detail is specified this command displays the registered multicast groups on the interface in detail. Format Mode show ip igmp groups {unit/slot/port | vlan vland-id} [detail] Privileged EXEC IP Multicast Commands 1046 CLI Command Reference Manual