Netgear XSM4324FS CLI Manual Software Version 12.x - Page 158
tacacs-server timeout
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description unit/slot/port The unit identifier assigned to the switch, in unit/slot/port format. loopback-id The loopback interface. The range of the loopback ID is 0 to 7. vlan-id Configures the VLAN interface to use as the source IP address. The range of the VLAN ID is 1 to 4093. Command example: (Config)#tacacs-server source-interface loopback 0 (Config)#tacacs-server source-interface 1/0/1 (Config)#no tacacs-server source-interface no tacacs-server source-interface Use this command in Global Configuration mode to remove the global source interface (Source IP selection) for all TACACS+ communications between the TACACS+ client and the server. Format Mode no tacacs-server source-interface Global Config tacacs-server timeout Use the tacacs-server timeout command to set the time-out value in seconds for communication with the TACACS+ servers. The seconds argument is a number in the range of 1-30 seconds. If you do not specify a time-out value, the command sets the global time-out to the default value. TACACS+ servers that do not use the global time-out will retain their configured time-out values. Default Format Mode 5 tacacs-server timeout seconds Global Config no tacacs-server timeout Use the no tacacs-server timeout command to restore the default timeout value for all TACACS servers. Format Mode no tacacs-server timeout Global Config Management Commands 158 CLI Command Reference Manual