Netgear XSM4324FS CLI Manual Software Version 12.x - Page 848
show ipv6 route kernel, show ipv6 route net-prototype
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 848 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show ipv6 route hw-failure IPv6 Routing Table - 4 entries Codes: C - connected, S - static, 6To4 - 6to4 Route, B - BGP Derived O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF Ext 1, OE2 - OSPF Ext 2 ON1 - OSPF NSSA Ext Type 1, ON2 - OSPF NSSA Ext Type 2, K - kernel P - Net Prototype P 3001::/64 [0/1] via 2001::4, 00h:00m:04s, 0/1 hw-failure P 3001:0:0:1::/64 [0/1] via 2001::4, 00h:00m:04s, 0/1 hw-failure P 3001:0:0:2::/64 [0/1] via 2001::4, 00h:00m:04s, 0/1 hw-failure P 3001:0:0:3::/64 [0/1] via 2001::4, 00h:00m:04s, 0/1 hw-failure show ipv6 route kernel This command displays kernel routes, if any exist. Format Mode show ipv6 route kernel Privileged EXEC show ipv6 route 6to4 This command displays IPv6-over-IPv4 tunnels that are manually configured in the switch. Format Mode show ipv6 route 6to4 Privileged EXEC show ipv6 route net-prototype This command displays the net prototype routes. The output displays the net prototype routes with a P. Format Mode show ipv6 route net-prototype Privileged EXEC Command example: (NETGEAR Switch) #show ipv6 route net-prototype IPv6 Routing Table - 2 entries Codes: C - connected, S - static, 6To4 - 6to4 Route, B - BGP Derived O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF Ext 1, OE2 - OSPF Ext 2 ON1 - OSPF NSSA Ext Type 1, ON2 - OSPF NSSA Ext Type 2, K - kernel IPv6 Commands 848 CLI Command Reference Manual