Netgear XSM4324FS CLI Manual Software Version 12.x - Page 741
ip ospf cost, ip ospf database-filter all out, ip ospf dead-interval, Interface Configuration mode.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 741 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ip ospf cost This command configures the cost on an OSPF interface or range of interfaces. The cost parameter has a range of 1 to 65535. Default Format Mode 10 ip ospf cost cost Interface Config no ip ospf cost This command configures the default cost on an OSPF interface. Format Mode no ip ospf cost Interface Config ip ospf database-filter all out This command disables OSPFv2 LSA flooding on an interface. Use this command in Interface Configuration mode. Default Format Mode Disabled ip ospf database-filter all out Interface Configuration no ip ospf database-filter all out This command enables OSPFv2 LSA flooding on an interface. Use this command in Interface Configuration mode. Default Format Mode Disabled no ip ospf database-filter all out Interface Configuration ip ospf dead-interval This command sets the OSPF dead interval for the specified interface or range of interfaces. The value for seconds is a valid positive integer in the range 1-65535 and represents the period in seconds that a router's Hello packets are allowed to go undetected before its neighbor routers declare that the router is down. The value for the length of time must be the same for all routers attached to a common network. This value should be some multiple of the Hello Interval (for example, 4). Routing Commands 741 CLI Command Reference Manual