Netgear XSM4324FS CLI Manual Software Version 12.x - Page 126

M4300 Intelligent Edge Series Fully Managed Stackable Switches Line ------Console Telnet SSH EXEC Method List Command Method List dfltExecList dfltCmdsList dfltExecList dfltCmdsList dfltExecList UserCmdAudit clear accounting statistics This command clears the accounting statistics. Format Mode clear accounting statistics Privileged Exec show domain-name This command displays the configured domain-name. Format Mode show domain-name Privileged Exec Command example: (NETGEAR Switch) # (NETGEAR Switch) #show domain-name Domain Domain-name : Enable :abc SNMP Commands This section describes the commands that you can use to configure Simple Network Management Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so that it can communicate with SNMP managers on your network. snmp-server This command sets the name and the physical location of the switch and the organization responsible for the network. The range for the name, loc and con parameters is from 1 to 31 alphanumeric characters. Default Format Mode none snmp-server {sysname name | location loc | contact con} Global Config Management Commands 126 CLI Command Reference Manual