Netgear XSM4324FS CLI Manual Software Version 12.x - Page 397
spanning-tree vlan priority, show spanning-tree, valid value.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default Format Mode None spanning-tree vlan vlan-id port-priority priority Interface Config Parameter vlan-list priority Description The VLANs to which to apply this command. The VLAN port priority. The range is 0-255. spanning-tree vlan priority Use this command to configure the bridge priority of a VLAN. The default value is 32768. If the value configured is not among the specified values, it will be rounded off to the nearest valid value. Default Format Mode 32768 spanning-tree vlan vlan-list priority priority Global Config Parameter vlan-list priority Description The VLANs to which to apply this command. The VLAN bridge priority. Valid values are 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. show spanning-tree This command displays spanning tree settings for the common and internal spanning tree. The following details are displayed. Format Mode show spanning-tree Privileged EXEC User EXEC Term Definition Bridge Priority Specifies the bridge priority for the Common and Internal Spanning tree (CST). The value lies between 0 and 61440. It is displayed in multiples of 4096. Bridge Identifier The bridge identifier for the CST. It is made up using the bridge priority and the base MAC address of the bridge. Time Since Time in seconds. Topology Change Switching Commands 397 CLI Command Reference Manual