Netgear XSM4324FS CLI Manual Software Version 12.x - Page 52

M4300 Intelligent Edge Series Fully Managed Stackable Switches show checkpoint statistics (for stack configuration) Use this command to display general information about the checkpoint service operation. Format Mode show checkpoint statistics Privileged EXEC Term Description Messages Checkpointed The number of checkpoint messages that are transmitted to the backup unit. Range: Integer. Default: 0 Bytes Checkpointed The number of bytes transmitted to the backup unit. Range: Integer. Default: 0 Time Since Counters Cleared The number of days, hours, minutes and seconds since the counters were reset to zero. The counters are cleared when a unit becomes manager or when you issue the clear checkpoint statistics command. Range: Time Stamp. Default: 0d00:00:00 Checkpoint Message Rate Average The average number of checkpoint messages per second. The average is computed over the period since the counters were cleared. Range: Integer. Default: 0 Last 10-second Message Rate Average The average number of checkpoint messages per second in the last 10-second interval. This average is updated once every 10 seconds. Range: Integer. Default: 0 Highest 10-second The highest rate recorded over a 10-second interval since the counters were cleared. Message Rate Range: Integer. Default: 0 Command example: (Switch)#show checkpoint statistics Messages Checkpointed 6708 Bytes Checkpointed 894305 Time Since Counters Cleared 3d 01:05:09 Checkpoint Message Rate Average...........0.025 msg/sec Last 10-second Message Rate Average.......0 msg/sec Highest 10-second Message Rate............8 msg/sec clear checkpoint statistics (for stack configuration) Use this command to clear the statistics for the checkpointing process. Format Mode clear checkpoint statistics Privileged EXEC Stacking Commands 52 CLI Command Reference Manual