Netgear XSM4324FS CLI Manual Software Version 12.x - Page 150
Field, Description, NETGEAR Switch #show radius servers name Default_RADIUS_Server
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Field Description Number of Retransmits The configured value of the maximum number of times a request packet is retransmitted. Message Authenticator A global parameter to indicate whether the Message Authenticator attribute is enabled or disabled. Time Duration The configured timeout value, in seconds, for request retransmissions. RADIUS A global parameter to indicate whether the accounting mode for all the servers is enabled or not. Accounting Mode RADIUS Attribute 4 A global parameter to indicate whether the NAS-IP-Address attribute has been enabled to use in Mode RADIUS requests. RADIUS Attribute 4 A global parameter that specifies the IP address to be used in NAS-IP-Address attribute used in Value RADIUS requests. Command example: (NETGEAR Switch) #show radius servers Current Host Address Server Name Port Type * 192.168.37.200 Network1_RADIUS_Server 1813 Primary 192.168.37.201 Network2_RADIUS_Server 1813 Secondary 192.168.37.202 Network3_RADIUS_Server 1813 Primary 192.168.37.203 Network4_RADIUS_Server 1813 Secondary Command example: (NETGEAR Switch) #show radius servers name Current Host Address Server Name Type 192.168.37.200 Network1_RADIUS_Server Secondary 192.168.37.201 Network2_RADIUS_Server Primary 192.168.37.202 Network3_RADIUS_Server Secondary 192.168.37.203 Network4_RADIUS_Server Primary Command example: (NETGEAR Switch) #show radius servers name Default_RADIUS_Server Server Name Default_RADIUS_Server Host Address 192.168.37.58 Secret Configured No Message Authenticator Enable Number of Retransmits 4 Time Duration 10 RADIUS Accounting Mode Disable RADIUS Attribute 4 Mode Enable RADIUS Attribute 4 Value 192.168.37.60 Management Commands 150 CLI Command Reference Manual