Netgear XSM4324FS CLI Manual Software Version 12.x - Page 98

M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description list-name Character string used to name the list of authentication methods activated, when using access higher privilege levels. Range: 1-15 characters. method1 [method2...] Specify at least one from the following: • deny. Used to deny access. • enable. Uses the enable password for authentication. • line. Uses the line password for authentication. • none. Uses no authentication. • radius. Uses the list of all RADIUS servers for authentication. • tacacs. Uses the list of all TACACS+ servers for authentication. Command example: The following example sets authentication to access higher privilege levels: (NETGEAR Switch)(config)# aaa authentication enable default enable no aaa authentication enable Use this command to return to the default configuration. Format Mode no aaa authentication enable {default | list-name} Global Config aaa authorization Use this command to configure command and exec authorization method lists. This list is identified by default or a user-specified list-name. If tacacs is specified as the authorization method, authorization commands are notified to a TACACS+ server. If none is specified as the authorization method, command authorization is not applicable. A maximum of five authorization method lists can be created for the commands type. Note: The local method is not supported for command authorization. Command authorization with RADIUS functions only if the applied authentication method is also RADIUS. Format Mode aaa authorization {exec | commands} {default | list-name} method1 [method2...] Global Config Management Commands 98 CLI Command Reference Manual