Netgear XSM4324FS CLI Manual Software Version 12.x - Page 453
set gvrp adminmode, set gvrp interfacemode, show gvrp configuration, Config mode. If GVRP is disabled
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 453 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches set gvrp adminmode This command enables GVRP on the system. Default Format Mode Disabled set gvrp adminmode Privileged EXEC no set gvrp adminmode This command disables GVRP. Format Mode no set gvrp adminmode Privileged EXEC set gvrp interfacemode This command enables GVRP on a single port (Interface Config mode), a range of ports (Interface Range mode), or all ports (Global Config mode). Default Format Mode Disabled set gvrp interfacemode Interface Config Interface Range Global Config no set gvrp interfacemode This command disables GVRP on a single port (Interface Config mode) or all ports (Global Config mode). If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect. Format Mode no set gvrp interfacemode Interface Config Global Config show gvrp configuration This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces. Format Mode show gvrp configuration {unit/slot/port | all} Privileged EXEC User EXEC Switching Commands 453 CLI Command Reference Manual