Netgear XSM4324FS CLI Manual Software Version 12.x - Page 409

M4300 Intelligent Edge Series Fully Managed Stackable Switches Auto-calculate Port Path Cost Enabled Port Path Cost 0 Auto-Calculate External Port Path Cost......... Enabled External Port Path Cost 0 Designated Root 80:00:00:10:18:48:FC:07 Root Path Cost 0 Designated Bridge 80:00:00:10:18:48:FC:07 Designated Port Identifier 00:00 Topology Change Acknowledge FALSE Hello Time 2 Edge Port FALSE Edge Port Status FALSE Point to Point MAC Status TRUE CST Regional Root 80:00:00:10:18:48:FC:07 CST Internal Root Path Cost 0 Loop Inconsistent State FALSE Transitions Into Loop Inconsistent State....... 0 Transitions Out Of Loop Inconsistent State..... 0 --More-- or (q)uit show spanning-tree mst port summary This command displays the settings of one or all ports within the specified multiple spanning tree instance. The parameter mstid indicates a particular MST instance. The parameter unit/slot/port indicates the desired switch port; the keyword all indicates all ports. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port number. If you specify 0 (defined as the default CIST ID) as the mstid, the status summary displays for one or all ports within the common and internal spanning tree. Format Mode show spanning-tree mst port summary mstid {unit/slot/port | lag lag-intf-num | all} Privileged EXEC User EXEC Term MST Instance ID Interface STP Mode Type STP State Definition The MST instance associated with this port. The interface. Indicates whether spanning tree is enabled or disabled on the port. Currently not used. The forwarding state of the port in the specified spanning tree instance. Switching Commands 409 CLI Command Reference Manual