Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1044
ip igmp query-interval, ip igmp query-max-response-time, no ip igmp last-member-query-interval
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1044 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ip igmp last-member-query-interval This command resets the Maximum Response Time to the default value. Format Modes no ip igmp last-member-query-interval Interface Config ip igmp query-interval This command configures the query interval for the specified interface or range of interfaces. The query interval determines how fast IGMP Host-Query packets are transmitted on this interface. The range for the seconds argument is 1 to 3600 seconds. Default Format Modes 125 seconds ip igmp query-interval seconds Interface Config no ip igmp query-interval This command resets the query interval for the specified interface to the default value. This is the frequency at which IGMP Host-Query packets are transmitted on this interface. Format Modes no ip igmp query-interval Interface Config ip igmp query-max-response-time This command configures the maximum response time interval for the specified interface or range of interfaces, which is the maximum query response time advertised in IGMPv2 queries on this interface. The deciseconds argument is the time interval, specified in 0 to 255 tenths of a second. Default Format Mode 100 ip igmp query-max-response-time desciseconds Interface Config no ip igmp query-max-response-time This command resets the maximum response time interval for the specified interface, which is the maximum query response time advertised in IGMPv2 queries on this interface to the default value. The maximum response time interval is reset to the default time. Format Mode no ip igmp query-max-response-time Interface Config IP Multicast Commands 1044 CLI Command Reference Manual