Netgear XSM4324FS CLI Manual Software Version 12.x - Page 777
ip rip receive version, rip-1c
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 777 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches authentication type is none. Neither the default password key nor the default key id are configured. Default Format Mode none ip rip authentication {none | {simple key} | {encrypt key keyid}} Interface Config no ip rip authentication This command sets the default RIP Version 2 Authentication Type for an interface. Format Mode no ip rip authentication Interface Config ip rip receive version This command configures an interface or range of interfaces to allow RIP control packets of the specified version or versions to be received. The options are: rip1 to receive only RIP version 1 formatted packets; rip2 for RIP version 2; both to receive packets from either format; or none to not allow any RIP control packets to be received. Default Format Mode both ip rip receive version {rip1 | rip2 | both | none} Interface Config no ip rip receive version This command configures the interface to allow RIP control packets of the default version(s) to be received. Format Mode no ip rip receive version Interface Config ip rip send version This command configures an interface or range of interfaces to allow RIP control packets of the specified version to be sent. The options are: rip1 to send only RIP version-1 formatted packets; rip2 for RIP version 2; rip-1c to send RIP version-2 formatted packets through a broadcast; or none to not allow any RIP control packets to be sent. Routing Commands 777 CLI Command Reference Manual