Netgear XSM4324FS CLI Manual Software Version 12.x - Page 277
ip host, no ip name source-interface
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ip name source-interface Use this command to reset the DNS source interface to the default settings. Format Mode no ip name source-interface Global Config ip host Use this command to define static host name-to-address mapping in the host cache. The parameter name is host name and ipaddress is the IP address of the host. The host name can include 1-255 alphanumeric characters, periods, hyphens, underscores, and non-consecutive spaces. Hostnames that include one or more space must be enclosed in quotation marks, for example "lab-pc 45". Default Format Mode none ip host name ipaddress Global Config no ip host Use this command to remove the name-to-address mapping. Format Mode no ip host name Global Config ipv6 host Use this command to define static host name-to-IPv6 address mapping in the host cache. The parameter name is host name and v6 address is the IPv6 address of the host. The host name can include 1-255 alphanumeric characters, periods, hyphens, and spaces. Host names that include one or more space must be enclosed in quotation marks, for example "lab-pc 45". Default Format Mode none ipv6 host name v6 address Global Config Utility Commands 277 CLI Command Reference Manual