Netgear XSM4324FS CLI Manual Software Version 12.x - Page 474

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configured MAB Mode Enabled Operational MAB Mode Disabled VLAN Id 0 VLAN Assigned Reason Not Assigned Reauthentication Period (secs 3600 Reauthentication Enabled FALSE Key Transmission Enabled FALSE EAPOL flood Mode Enabled FALSE Control Direction both Maximum Users 16 Unauthenticated VLAN ID 0 Session Timeout 0 Session Termination Action Default For each client authenticated on the port, the show dot1x detail unit/slot/port command displays the following MAC-based dot1x parameters if the port-control mode for that specific port is MAC-based. Term Definition Supplicant MAC-Address The MAC-address of the supplicant. Authenticator PAE Current state of the authenticator PAE state machine. Possible values are Initialize, Disconnected, State Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuthorized, and ForceUnauthorized. Backend Authentication State Current state of the backend authentication state machine. Possible values are Request, Response, Success, Fail, Timeout, Idle, and Initialize. VLAN-Assigned The VLAN assigned to the client by the radius server. Logical Port The logical port number associated with the client. If you use the optional parameter statistics unit/slot/port, the following dot1x statistics for the specified port appear. Term Definition Port The interface whose statistics are displayed. EAPOL Frames Received The number of valid EAPOL frames of any type that have been received by this authenticator. EAPOL Frames Transmitted The number of EAPOL frames of any type that have been transmitted by this authenticator. EAPOL Start The number of EAPOL start frames that have been received by this authenticator. Frames Received EAPOL Logoff The number of EAPOL logoff frames that have been received by this authenticator. Frames Received Switching Commands 474 CLI Command Reference Manual