Netgear XSM4324FS CLI Manual Software Version 12.x - Page 441
voice vlan Interface Config, voice vlan auth
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches voice vlan (Interface Config) Use this command to enable the Voice VLAN capability on the interface or range of interfaces. Default Format Mode Disabled voice vlan {vlan-id | dot1p priority | none | untagged} Interface Config You can configure Voice VLAN in one of four different ways. Parameter vlan-id dot1p none untagged Description Configure the IP phone to forward all voice traffic through the specified VLAN. Valid VLAN ID's are from 1 to 4093 (the max supported by the platform). Configure the IP phone to use 802.1p priority tagging for voice traffic and to use the default native VLAN (VLAN 0) to carry all traffic. Valid priority range is 0 to 7. Allow the IP phone to use its own configuration to send untagged voice traffic. Configure the phone to send untagged voice traffic. no voice vlan (Interface Config) Use this command to disable the Voice VLAN capability on the interface. Format Mode no voice vlan Interface Config voice vlan auth This command lets the switch accept or reject voice traffic when the port is in an unauthorized state. By default, the switch rejects voice traffic when the port is in an unauthorized state. Default Format Mode disable voice vlan auth [disable | enable] Interface Config Switching Commands 441 CLI Command Reference Manual