Netgear XSM4324FS CLI Manual Software Version 12.x - Page 295
debug ip vrrp, debug ipv6 dhcp, debug ipv6 mcache packet
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches debug ip vrrp Use this command to enable VRRP debug protocol messages. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug ip vrrp Privileged EXEC no debug ip vrrp Use this command to disable VRRP debug protocol messages. Format Mode no debug ip vrrp Privileged EXEC debug ipv6 dhcp This command displays "debug" information about DHCPv6 client activities and traces DHCPv6 packets to and from the local DHCPv6 client. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug ipv6 dhcp Privileged EXEC no debug ipv6 dhcp This command disables the display of "debug" trace output for DHCPv6 client activity. Format Mode no debug ipv6 dhcp Privileged EXEC debug ipv6 mcache packet Use this command for tracing MDATAv6 packet reception and transmission. The receive keyword traces only received MDATAv6 packets and the transmit keyword traces only transmitted MDATAv6 packets. When neither keyword is used in the command, then all data packet traces are dumped. Vital information such as source address, destination address, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Utility Commands 295 CLI Command Reference Manual