Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1085
ipv6 mld-proxy reset-status, show ipv6 mld-proxy, no ipv6 mld-proxy unsolicited-report-interval
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1085 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ipv6 mld-proxy unsolicited-report-interval Use this command to reset the MLD-Proxy router's unsolicited report interval to the default value. Format Mode no ipv6 mld-proxy unsolicit-rprt-interval Interface Config ipv6 mld-proxy reset-status Use this command to reset the host interface status parameters of the MLD-Proxy interface or range of interfaces. This command is only valid when you enable MLD-Proxy on the interface. Format Mode ipv6 mld-proxy reset-status Interface Config show ipv6 mld-proxy Use this command to display a summary of the host interface status parameters. Format Mode show ipv6 mld-proxy Privileged EXEC User EXEC The command displays the following parameters only when you enable MLD-Proxy. Field Description Interface Index The interface number of the MLD-Proxy. Admin Mode Indicates whether MLD-Proxy is enabled or disabled. This is a configured value. Operational Mode Indicates whether MLD-Proxy is operationally enabled or disabled. This is a status parameter. Version The present MLD host version that is operational on the proxy interface. Number of Multicast Groups The number of multicast groups that are associated with the MLD-Proxy interface. Unsolicited Report Interval The time interval at which the MLD-Proxy interface sends unsolicited group membership report. Querier IP Address on Proxy Interface The IP address of the Querier, if any, in the network attached to the upstream interface (MLD-Proxy interface). Older Version 1 Querier Timeout The interval used to timeout the older version 1 queriers. Proxy Start Frequency The number of times the MLD-Proxy has been stopped and started. IPv6 Multicast Commands 1085 CLI Command Reference Manual