Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1108
Management
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1108 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 27. DHCPv6 Client Log Messages Component DHCP6 Client DHCP6 Client Message Failed to add DNS Server xxx to DNS Client. Failed to add Domain name xxx to DNS Client. Cause This message appears when the update of a DNS6 Server address given by the DHCPv6 Server to the DNS6 Client fails. This message appears when the update of a DNS6 Domain name info given by the DHCPv6 Server to the DNS6 Client fails. Table 28. DHCPv4 Client Log Messages Component DHCP4 Client DHCP4 Client DHCP4 Client DHCP4 Client DHCP4 Client Message Cause Unsupported subOption (xxx) in Vendor Specific This message appears when a message is Option in received DHCP pkt received from the DHCP Server that contains an un-supported Vendor Option. Failed to acquire an IP address on xxx; DHCP Server did not respond. DNS name server entry add failed. DNS domain name list entry addition failed. This message appears when the DHCP Client fails to lease an IP address from the DHCP Server. This message appears when the update of a DNS Domain name server info given by the DHCP Server to the DNS Client fails. This message appears when the update of a DNS Domain name list info given by the DHCP Server to the DNS Client fails. Interface xxx Link State is Down. Connect the port and try again. This message appears when the Network protocol is configured with DHCP without any active links in the Management VLAN. Management Table 29. SNMP Log Message Component SNMP Message EDB Callback: Unit Join: x. Cause A new member joined the stack. Switch Software Log Messages 1108 CLI Command Reference Manual