Netgear XSM4324FS CLI Manual Software Version 12.x - Page 600

M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show port-security 0/1 Intf -----0/1 Admin Dynamic Mode Limit Disabled 1 Static Limit --------- 1 Violation Trap Mode --------Disabled Sticky Mode -------Enabled show port-security dynamic This command displays the dynamically locked MAC addresses for the port. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port number. Format Mode show port-security dynamic unit/slot/port Privileged EXEC Term MAC Address Definition MAC Address of dynamically locked MAC. show port-security static This command displays the statically locked MAC addresses for a port. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port number. Format Mode show port-security static {unit/slot/port | lag lag-intf-num} Privileged EXEC Term Statically Configured MAC Address VLAN ID Sticky Definition The statically configured MAC address. The ID of the VLAN that includes the host with the specified MAC address. Indicates whether the static MAC address entry is added in sticky mode. Command example: (NETGEAR Switch) #show port-security static 1/0/1 Number of static MAC addresses configured: 2 Statically configured MAC Address VLAN ID Sticky 00:00:00:00:00:01 2 Yes 00:00:00:00:00:02 2 No Switching Commands 600 CLI Command Reference Manual