Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1076
IPv6 MLD Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1076 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR) #show ipv6 pim statistics vlan 10 Interface Stat Hello Register Reg-Stop Join/Pru BSR Assert CRP Vl10 Rx 0 0 0 0 0 0 0 Tx 2 0 0 0 0 0 0 Invalid Packets Received - 0 Command example: (NETGEAR) #show ipv6 pim statistics 1/0/5 Interface Stat Hello Register Reg-Stop Join/Pru BSR Assert CRP 1/0/5 Rx 0 0 6 5 0 0 0 Tx 10 9 0 0 0 0 0 Invalid Packets Received - 0 IPv6 MLD Commands IGMP and MLD snooping are Layer 2 functionalities but IGMP and MLD are Layer 3 multicast protocols. If you want to use IGMP and MLD snooping, a network must include a multicast router that can function as a querier to solicit multicast group registrations. However, if multicast traffic is destined to hosts within the same network, a multicast router is not required but an IGMP and MLD snooping querier must be running on one of the switches in the network and snooping must be enabled on all switches in the network. For more information, see IGMP Snooping Configuration Commands on page 562 and MLD Snooping Commands on page 581. ipv6 mld router Use this command, in the administrative mode of the router, to enable MLD in the router. Default Format Mode Disabled ipv6 mld router Global Config IPv6 Multicast Commands 1076 CLI Command Reference Manual