Netgear XSM4324FS CLI Manual Software Version 12.x - Page 241

M4300 Intelligent Edge Series Fully Managed Stackable Switches clear mac-addr-table This command clears the dynamically learned MAC addresses for all ports, for a specified VLAN, for a specified unit/slot/port, or for the entire switch based on the argument. You can also clear a specific MAC address. Format Mode clear mac-addr-table {all | vlan vlan-id | interface unit/slot/port | macaddr [macmask]} Privileged EXEC Parameter Description all All dynamically learned forwarding database entries in the forwarding database table. vlan-id The dynamically learned forwarding database entries for the VLAN ID. unit/slot/port The dynamically learned forwarding database entries for the interface. macaddr macmask The dynamically learned forwarding database entries that match the range specified by the MAC address and MAC mask. If you do not specify the MAC mask, only the specified MAC address is removed from the forwarding database table. clear igmpsnooping This command clears the tables managed by the IGMP Snooping function and attempts to delete these entries from the Multicast Forwarding Database. Format Mode clear igmpsnooping Privileged EXEC clear ip access-list counters This command clears the counters of a specific IP ACL (which you can identify by either its ID or its name) or specific IP ACL rule. Format Mode clear ip access-list counters {{acl-id | acl-name} | rule-id} Privileged EXEC clear mac access-list counters This command clears the counters of a specific MAC ACL or specific MAC ACL rule. Format Mode clear mac access-list counters {acl-name | rule-id} Privileged EXEC Utility Commands 241 CLI Command Reference Manual