Netgear XSM4324FS CLI Manual Software Version 12.x - Page 580
This command is specific to IGMP.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 580 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches • in Interface Config mode, on an interface • in VLAN Config mode, on a particular VLAN and all interfaces participating in the VLAN. By default, the proxy querrier is enabled. Default Format Mode enabled set igmp proxy-querier [vlan-id] Global Config Interface Config VLAN Config no set igmp proxy-querier This command stops the switch from sending proxy queries through different command modes in the following ways: • in Global Config mode, on the entire switch • in Interface Config mode, on an interface • in VLAN Config mode, on a particular VLAN and all interfaces participating in the VLAN. This command is specific to IGMP. Format Mode no set igmp proxy-querier [vlan-id] Global Config Interface Config VLAN Config show igmpsnooping proxy-querier This command shows the global admin mode of the IGMP snooping proxy-querier and the interface on which it is enabled. Format Mode show igmpsnooping proxy-querier Privileged EXEC Command example: (Netgear Switch) #show igmpsnooping proxy-querier Admin Mode Enable Interfaces Enabled for IGMP Proxy Querier...... 1/0/1 1/0/2 1/0/3 1/0/4 Switching Commands 580 CLI Command Reference Manual