Netgear XSM4324FS CLI Manual Software Version 12.x - Page 890

M4300 Intelligent Edge Series Fully Managed Stackable Switches • As an option, use lsid to specify the link state ID (LSID). • Use adv-router to show the LSAs that are restricted by the advertising router. AS an option, use rtrid to specify the router ID. • Use self-originate to display the LSAs in that are self originated. Information is displayed only if OSPF is enabled. Format Modes show ipv6 ospf [area-id] database [{external | inter-area {prefix | router} | link | network | nssa-external | prefix | router | unknown {area | as | link}}] [lsid] [{adv-router [rtrid] | self-originate}] Privileged EXEC User EXEC For each link-type and area, the following information is displayed. Term Link Id Adv Router Age Sequence Checksum Prefix Interface Rtr Count Definition A number that uniquely identifies an LSA that a router originates from all other self originated LSAs of the same LS type. The Advertising Router. Is a 32-bit dotted decimal number representing the LSDB interface. A number representing the age of the link state advertisement in seconds. A number that represents which LSA is more recent. The total number LSA checksum. The IPv6 prefix. The interface for the link. The number of routers attached to the network. show ipv6 ospf database database-summary Use this command to display the number of each type of LSA in the database and the total number of LSAs in the database. Format Modes show ipv6 ospf database database-summary Privileged EXEC User EXEC Term Router Network Inter-area Prefix Inter-area Router Definition Total number of router LSAs in the OSPFv3 link state database. Total number of network LSAs in the OSPFv3 link state database. Total number of inter-area prefix LSAs in the OSPFv3 link state database. Total number of inter-area router LSAs in the OSPFv3 link state database. IPv6 Commands 890 CLI Command Reference Manual