Netgear XSM4324FS CLI Manual Software Version 12.x - Page 529
dhcp l2relay, dhcp l2relay circuit-id vlan, dhcp l2relay remote-id subscription
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 529 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches dhcp l2relay This command enables the DHCP Layer 2 Relay agent for an interface a range of interfaces in, or all interfaces. The subsequent commands mentioned in this section can only be used when the DHCP L2 relay is enabled. Format Mode dhcp l2relay Global Config Interface Config no dhcp l2relay This command disables DHCP Layer 2 relay agent for an interface or range of interfaces. Format Mode no dhcp l2relay Global Config Interface Config dhcp l2relay circuit-id vlan This parameter sets the DHCP Option-82 Circuit ID for a VLAN. When enabled, the interface number is added as the Circuit ID in DHCP option 82. Format Mode dhcp l2relay circuit-id vlan vlan-list Global Config Parameter vlan-list Description The VLAN ID. The range is 1-4093. Separate nonconsecutive IDs with a comma (,) no spaces and no zeros in between the range. Use a dash (-) for the range. no dhcp l2relay circuit-id vlan This parameter clears the DHCP Option-82 Circuit ID for a VLAN. Format Mode no dhcp l2relay circuit-id vlan vlan-list Global Config dhcp l2relay remote-id subscription This command sets the Option-82 Remote-ID string for a given service subscription identified by subscription-string on a given interface or range of interfaces. The subscription-string is a character string which needs to be matched with a configured DOT1AD subscription string for correct operation. The remoteid-string is a character string. When remote-id string is set using this command, all Client DHCP requests that fall under this service subscription are added with Option-82 Remote-id as the configured remote-id string. Switching Commands 529 CLI Command Reference Manual