Netgear XSM4324FS CLI Manual Software Version 12.x - Page 532
show dhcp l2relay all, show dhcp l2relay circuit-id vlan
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 532 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter vlan-list Description The VLAN ID. The range is 1-4093. Separate nonconsecutive IDs with a comma (,) no spaces and no zeros in between the range. Use a dash (-) for the range. no dhcp l2relay vlan Use this command to disable the DHCP L2 Relay agent for a set of VLANs. Format Mode no dhcp l2relay vlan vlan-list Global Config show dhcp l2relay all This command displays the summary of DHCP L2 Relay configuration. Format Mode show dhcp l2relay all Privileged EXEC Command example: (NETGEAR Switch) #show dhcp l2relay all DHCP L2 Relay is Enabled. Interface L2RelayMode 0/2 Enabled 0/4 Disabled TrustMode untrusted trusted VLAN Id L2 Relay CircuitId RemoteId 3 Disabled Enabled --NULL-- 5 Enabled Enabled --NULL-- 6 Enabled Enabled NETGEAR 7 Enabled Disabled --NULL-- 8 Enabled Disabled --NULL-- 9 Enabled Disabled --NULL-- 10 Enabled Disabled --NULL-- show dhcp l2relay circuit-id vlan This command displays DHCP circuit-id vlan configuration. Format Mode show dhcp l2relay circuit-id vlan vlan-list Privileged EXEC Switching Commands 532 CLI Command Reference Manual